Apoxie Sculpt – 2 Part Modeling Compound (A & B) – 1 Pound, Natural

You might notice a fingerprint or two when you open a new container of Apoxie Sculpt don’t worry, it hasn’t been used! Each container is carefully hand packed. Apoxie Sculpt combines the features and benefits of sculpting clay with the adhesive power of epoxy! It’s smooth, putty-like consistency is easy to mix and use. The Apoxie Self-hardens (No Baking required) and cures hard in 24 hours to appear with a semi-gloss finish. The product adheres to nearly any surface and is great for sculpting, embellishing, bonding and filling almost anything. In terms of Exterior Quality! The product accepts paints, stains, mica powders and more for a variety of finishing options. You can choose to Sand, tap, drill, carve, lathe, etc. after setup and that too without chipping, cracking or flaking. Directions to use: 1. Wear disposable gloves to measure equal parts of A & B. Always retrieve parts A & B with different tools. 2. Mix & knead together for 2 minutes until thoroughly combined and a uniform color is achieved. Note incomplete mixing will give poor results. *Allow mixed product to rest 5 minutes for better handling. 3. Apoxie Sculpt is ready to use; working time is 1- 3 hours. Shape as desired. Smooth or textured with a wet finger, brush, Q-tip or sculpting tool. Self-hardens (NO?BAKING required); 24 hour full cure. 4. Cleanup: Soap & water or Aves Safety Solvent (very helpful for smoothing, removing fingerprints & cleaning up pigment / product residue before set-up). Working Time Line Guide: 1/2 hour: Sticky & most adhesive 1 to 2 hours: Easy to work with 2 to 3 hours: Setting up, form-able detail 24 hours: Hard, cured & waterproof Uses: Endless uses for artists, crafters, modelers, students, and more! Arts & Crafts include: Sculpting, Embellishing, Jewelry, Mosaic Work, Aquarium Props, Models & Kits, Customizing, Prototypes, Seam Filling, Outdoor Displays, Restorations, Wood Working, Wildlife Art ….just to name a few! Used for Cosplay.

Color May Vary: Due to the natural pigments in our product, color may vary slightly. Apoxie Sculpt White may have a grey white or stone white appearance.

Also check outTheApoxie Air Dry Clay – 2 Part Epoxy Clay – 1 Lb, Natural!